| Dimensions of the sterilization chamber (Diameter x H), mm |
213х557 |
| Volume, l |
20 |
| The volume of distilled water in the sterilizer tank, l |
2 |
| Maximum power of heating elements, kW |
1,4 |
| The sterilizer works from a single-phase alternating current network with voltage and frequency |
220V ±10% and 50 Hz |
| Overall dimensions (HxWxD), mm |
500х370х700 |
| Average service life, years |
8 |
| Weight without spare parts and accessories no more, kg |
45 |
| The emergency shutdown temperature in case of overheating in the chamber is no more than ℃ |
145 |
| Modes of sterilization |
| 1. Table of programs and cycles of sterilization of packaged medical products made of metals, glass, rubber without using the vacuum drying method |
| Name |
Program 3 |
Program 5 |
Program 6 |
Program 7 |
| Sterilization temperature, ℃ |
121± |
126± |
132± |
134± |
| MPa pressure; kg/cm2 |
0,11(1,1) |
0,14 (1,4) |
0,2 (2,0) |
0,21 (2,1) |
| ±0,01 (±0,1) |
±0,01 (±0,1) |
±0,01 (±0,1) |
±0,01 (±0,1) |
| Sterilization exposure time, min |
20 (+2) |
10 (+1) |
20 (+1) |
5 (+1) |
| Setting the program, monitoring the water in the tank, removing the residual vacuum |
| Air pumping |
| Draining condensate from the moisture separator |
| Heating up to 125℃ |
| Releasing the pressure until the temperature reaches 105℃ |
| Heating to the set temperature |
| Sterilization time |
| Pressure reduction in three stages until the temperature reaches 100℃ |
| Cooling to a temperature of 95℃ |
| Unloading |
| |
| 2. Table of programs and cycles of sterilization of empty, porous and packaged medical products using the vacuum drying method |
| Name |
Program 3 |
Program 5 |
Program 6 |
Program 7 |
| Sterilization temperature, ℃ |
121± |
126± |
132± |
134± |
| MPa pressure; kg/cm2 |
0,11(1,1) |
0,14 (1,4) |
0,2 (2,0) |
0,21 (2,1) |
| ±0,01 (±0,1) |
±0,01 (±0,1) |
±0,01 (±0,1) |
±0,01 (±0,1) |
| Sterilization exposure time, min |
20 (+2) |
10 (+1) |
20 (+1) |
5 (+1) |
| Setting the program, monitoring the water in the tank, removing the residual vacuum |
| Air pumping |
| Draining condensate from the moisture separator |
| Heating up to 125℃ |
| Releasing the pressure until the temperature reaches 105℃ |
| Heating to the set temperature |
| Sterilization time |
| Depressurization in three stages until the temperature reaches 120℃, 116℃, 106℃ |
| Vacuum drying |
| Equalization of pressure in the chamber to atmospheric pressure |
| Unloading |
| Delivery set |
| Sterilizer, unit |
1 |
| Cassette holder, pcs. |
1 |
| Cassette 260x159 pcs. |
4 |
| Cassette 520x159 pcs. |
2 |
| Insert, pcs. |
1 |
| Tank cover, pcs. |
1 |
| Front supports, pcs. |
2 |
| Rear supports, pcs. |
2 |
| Worm clamp 10-15 pcs. |
1 |
| Drainage pipe 10x1 1 m.p., pcs. |
1 |
| Spare parts, 1 pc.: |
Door gasket |
| Safety valve gasket |
| 10A fuse insert |
| 1A fuse insert |
| Operating instructions, copy |
1 |
