The stand for Hot Air Sterilizer is used to place sterilizers GP-10, GP-20, GP-40. It has a collapsible frame made of two sidewalls made of a steel profile pipe with a powder coating. A lower shelf made of thin sheet carbon steel with a powder coating is attached to the sides. The shelf is fixed with bolts and washers in the threaded holes of the side panels from above. The upper shelf, which is reinforced with channels, is also made of thin-sheet carbon steel with a powder coating and is fastened with bolts and washers in the threaded holes of the side panels from below. To eliminate unevenness of the floor, four adjustable supports (heels) are screwed into the lower part of the sidewalls.
Technical specifications:
Overall dimensions (WxDxH), mm: 700х580х730
Maximum load on the stand – 60 kg
Weight – 23 kg
Delivery set:
Frame side – 2 pcs.
Bottom shelf – 1 pc.
Top shelf – 1 pc.
Lintel – 1 pc.
Adjustable support – 4 pcs.
Screw M6x12 – 18 pcs.
